br16 half - size crystal can welded dpdt dry circuit to 2 amps universal contacts permit operation from dry circuit to rated load wit h the same contact set. unique heat sink/magnetic flux conductor improves heat diss ipation characteristics insures lower temperature rise. specially - designed magnetic circuit locates armature inside coil for more efficient swi tching action. specifications general contact arrangement .......................... 2pdt (2 form c) weight ................................................... .... 0.25 oz approx. designed to meet the requirements of mil - prf - 39016. performance contact rating (note 1) resistive ......................................... 2 amps @ 28 vdc or 115v 400 hz (case ungrounded) low level ............................ 10 - 50 a @ 10 - 50 mv dc or peak ac (note 4) life ................................... 100,000 operations minimum @ rated load, 125 o c pull in power ............................................ 175 mw approx. operate/release time ...................................... 4 ms max excluding bounce time at nominal coil voltage contact bounce time ...... 2 ms max @ 2 amps 28 vdc contact resistance before life ....................... 0.050 ohms max @ 2 amps and 6 vdc after life .......................... 0.100 ohms max @ 2 amps and 6 vdc environmental temperature range ............................... - 65 o c to +125 o c vibration (note 2) ............................... 0.4" da 10 - 38 hz, 20 g's 38 - 2,000 hz shock (operating) (note 2) ........................ 50 g's 11 ms electrical characteristics duty cycle ................................................... ..... continuous insulation resistance 10,000 megohms @ 500v 25 o c 1,000 megohms @ 500v 125 o c dielectric strength: sea level: contact to case ................................... 1,000 vrms contact to coil ..................................... 1,000 vrms coil to case ............................................ 500 vrms across open contacts ........................... 500 vrms 70,000 feet all points .................................................. 350 vrms notes: 1. for case grou nded loads and other ratings, consult the factory. 2. for applications requiring other shock and vibratio n levels, consult the factory. 3. for other ratings consult the factory. 4. relay contacts which have switched high level curre nts are no longer su itable for switching low level loads. 14930 e. alondra blvd., la mirada, ca 90638 - 5752 (714) 994 - 6500 fax (714) 994 - 3013 w: 2000 rev. 2 downloaded from: http:///
relay type nominal coil resistance terminal style mounti ng type nominal coil voltage br16 - 900 a 1 - 26v br16 coil data: model br16 part num ber br16 - 50()() - 6v br16 - 190()() - 12v br16 - 900()() - 26v br16 - 2.8k()() - 48v nominal coil voltage 6 vdc 12 vdc 26 vdc 48 vdc maximum coil voltage 7.3 vdc 14.8 vdc 32 vdc 59 vdc pull in voltage (max @ +125 o c) 4.4 vdc 8.4 vdc 18 vdc 33 vdc pull in voltage (max) 3 vdc 6 vdc 13 vdc 24 vdc drop out voltage (min) 0.3 vdc 0.6 vdc 1.3 vdc 2.4 vdc coil resistance 10% @ 25 o c 50 ohms 190 ohms 900 ohms 2.8k ohms schematic terminal v iew terminal styles mounting codes general notes unless otherwise specified, all tests made at nomin al coil voltages, @ 25 o c. for special coil variations, switching configurations, terminals styles and mounting types, consult the fa ctory. unless otherwise specified, tolerances on decimal dimensions are .010". specifications contained herein are subject to chan ge without no tice. 14930 e. alondra blvd., la mirada, ca 90638 - 5752 (714) 994 - 6500 fax (714) 994 - 3013 w: 2000 rev. 2 downloaded from: http:///
|
